accessories
Transfer Tape
4 m roll of iron-on transfer tape adhesive for renewalof adhesive on contour guide, easy, basic and race skins. Simply iron the adhesive onto clean skin.
Widths: 68 and 125 mm
Transfer Tape
50 m roll of iron-on transfer tape for the renewal of adhesive on contour guide, easy, basic and race skins. Simply iron the adhesive onto clean skin.
Widths: 100 and 125 mm
Glue in tubes
To renew the adhesive of contour guide, easy, basic and race skins. For 1-2 pairs.
75 ml tube, toluol-free solvent
Skin wax
Special paraffin wax to prevent skins from icing up.
In handy 40g plastic box
Mohair spray
Prevents skins from icing up and increases the glide performance.
250 ml pump spray (propellant-free)
hybrid cleaning spray
For the removal of stubborn dirt on our hybrid adhesive. Pump spray.
100 ml
Video: How to use cleaning spray
hybrid cleaning wipe
To clean the adhesive and improve its performance. 2 pieces for 1 pair of skins.
Sachet with 2 wipes
Liquid wax
Prevents skins from icing up and increases the glide performance.
100 ml bottle with sponge applicator
Varioclip
Tip fix, perfect for hybrid skins. Fits tip buckles from 75 to 115 mm, z-buckle and race tip.
Video: How to attach varioclip
Shark Tail Hook
Tail fix attached using a hammer, for simple length adjustment.
Wire buckle
Inner width range from 50 to 115 mm, z-buckle for skis with tip hole
sizes 50 | 65 | 75 | 85 | 95 | 105 | 115 mm
Folding clip
Clip to hold skins in place when folded over wire buckle.
widths 50 | 75 | 85 | 95 | 105 | 115 mm
Tail Clip | Tail Clip Wide
Tail clip sits flush, even on rounded tails. Wide version for tails with >5 mm
Tail Clip Set
Tail clip including strap and rivets for one pair of skins.
Rubber Tip Fix / Race Tip
Available in three widths, race tip fits skis with notch
65 for lightly shaped carving skis
75 for carving skis
85 for freeride skis
race tip for ski with notch
Tail Hook Set
Tail hook including rivets for one pair of skins.
Easy Tip Buckle with Velcro
Tip buckle with Velcro for easy skins.
Sizes 85 | 95 | 105 | 115 mm
Backing Foil
Store skins covered in this foil to keep the adhesive clean and tacky.
2 pieces x 1 m, 140 mm wdith
Protective Mesh
Keep the adhesive clean and tacky by sticking the mesh on it.
2 pieces x 1 m, 140 mm width
Trimming Tool
For easy and precise trimming along the ski edge.
Stuff Sack
For storing skins (with or without microfibre cloth). Use microfibre cloth to dry and clean ski base before applying skins.
Powder Leashes
Keep track of your skis in deep snow.
red or blue, ca. 150 cm
Demo ski / POS
Available for every model of skin.
offset hybrid cutter
Included with all hybrid skins. Gives skins the perfect offset without having to reposition them during the trimming process.
Video: How to trim using the hybrid cutter
